Can be used in the home, garage, shop, and any other places where electricity is needed is needed but no outlet is within reach 15 amp, 125 volt, 1875 watts. 12/3 SJTW. 2 foot cord with 3 outlets UL approved

Click here to buy

More info: Grip 39016 2 Ft. Extension Cord with Three Outlets

• Grip 37265 Clamp On Work Light with 6 Ft. Cord
• Eclipse 400-030 Outlet Tester - GFCI outlets
• Grip 39014 Tri Tap HD Adaptor
• Mantis® 9333 Cord Management Kit
• Grip 55274 Self-Priming Transfer (Siphon) Pump

The Grip 35402 is a 13-Pc Titanium Coated Wood Spade Bit Set. These 1/4″ shank bits are made of drop forged, heat treated steel construction. Precision ground spur and cutting create smoother and faster cuts. The spur point ensures accurate positioning and quick penetration. Spade bits make crisp, clean holes through wood projects.

Click here to buy

More info: Grip 35402 13-Pc Titanium Coated Wood Spade Bit Set

• Grip 35402 13-Pc Titanium Coated Wood Spade Bit Set
• Grip 35102 16-Piece Titanium Forstner Bit Set
• Grip 35290 300-Piece Drill and Driver Bit Set
• Irwin 3018003 29 Piece 1/16 inch to 1/2 inch Titanium Index Drill Bit Set
• Grip 35205 115-Piece Titanium Drill Bit Set

The Festool 492976 is a pack of 5 StickFix Abrasive Hook and Loop Sandpaper Sheet for 6″ Sanders. The abrasive sheets are used for sanding paints and varnishes. The StickFix system works on the hook and loop principle. Mushroom-shaped hooks on sanding pads and hard-wearing velvet fabric on the abrasive material form a secure, non-slip bond which can still be easily released.

Click here to buy

More info: Festool 492976 6″ StickFix Abrasive 120 Grit 8 Hole Hook & Loop Sandpaper Sheet (5 Pack)

• Festool 492984 6″ StickFix Abrasive 150 Grit 8 Hole Hook & Loop Sandpaper Sheet (100 Pack)
• Festool 492986 6″ StickFix Abrasive 220 Grit 8 Hole Hook & Loop Sandpaper Sheet (100 Pack)
• Festool 493117 5″ StickFix Abrasive 120 Grit 8 Hole Hook & Loop Sandpaper Sheet (50 Pack)
• Festool 492947 5″ StickFix Abrasive 120 Grit 8 Hole Hook & Loop Sandpaper Sheet (100 Pack)
• Festool 486397 6″ StickFix Abrasive 120 Grit 8 Hole Hook & Loop Sandpaper Sheet (50 Pack)

The Fein 6-37-17-187-01-3 is a box of 20, 100 Grit Finger Paper Sheet. The box contains 20 sanding sheets for the Finger pad attachment. The sheet attaches to the finger sanding pad on the Fein MultiMaster for removal of excess wood, finish and paint for faster surface removal in very small areas. The Finger Paper sheets are fully synthetic resin bonded which helps maximum grain retention.

Click here to buy

More info: Fein 6-37-17-187-01-3 100 Grit Finger Paper (Box of 20)

• Fein 6-37-17-187-01-3 100 Grit Finger Paper (Box of 20)
• Fein 6-37-17-191-01-6 220 Grit Finger Paper (Box of 20)
• Fein 6-37-17-188-01-1 120 Grit Finger Paper (Box of 20)
• Fein 6-37-28-073-01-6 Hook & Loop Backed 6″ 60 Grit Paper
• Fein 6-37-28-013-01-2 Hook & Loop Backed 6″ 180 Grit Paper

6" with a jaw adjustment of up to 2", and a throat depth of 1-1/2" Adjusts to the correct opening, easily adjusted to various sizes Locks with the squeeze of one hand

Click here to buy

More info: Irwin® Vise-Grip® 6R 6″ Locking C-Clamp with Regular Tips

• Irwin® Vise-Grip® 6R 6″ Locking C-Clamp with Regular Tips
• Irwin® Vise-Grip® 11R 11″ Locking C-Clamp with Regular Tips
• Irwin® Vise-Grip® 8R 8″ Locking Sheet Metal Tool
• Irwin® Vise-Grip® 11SP 11″ Locking C-Clamp with Swivel Pads
• Irwin® Vise-Grip® 20R 9″ Locking Chain Clamp with 18″ Chain

4-1/4″ bar clamp, jaw opening, 1-3/16″ throat depthSoft, durable pads protect delicate work, great for hobby workLightweight, handle designed for comfortable hand-spanEasily converts to a spreader

Click here to buy

More info: Irwin® Quick-Grip® 53006 4-1/4″ Micro Bar Clamp Spreader

• Irwin® Quick-Grip® 53006 4-1/4″ Micro Bar Clamp Spreader
• Irwin 2021424 24 inch Quick Grip XP Clamp/Spreader
• Grip 32045A 4″ Micro Ratcheting Bar Clamp & Spreader
• Irwin® Quick-Grip® 524QC 24″ Quick Change Bar Clamp
• Grip 32047A 6″ Ratcheting Bar Clamp & Spreader

Eclipse 100-003 is a 5″ Needle Nosed Plier. This Plier has Spring-Loaded handles with Smooth cushion grip for better handling. It has Serrated jaws. This Plier is used for Bending and cutting copper & other soft leads.

Click here to buy

More info: Eclipse 100-003 5″ Needle Nosed Plier

• Eclipse 100-003 5″ Needle Nosed Plier
• Eclipse 100-021 6″ Needle Nosed Plier
• Eclipse 200-010 Precision Wire Stripper
• Grip 57232 9″ Multipurpose Wire Stripper
• K-D Tools 3704 45º Hog Ring Pliers

12″ yellow steel square 8″ width 1/4″ depth

Click here to buy

More info: Great Neck® 10222 12″ Yellow Steel Square

• Great Neck® 10222 12″ Yellow Steel Square
• Great Neck® 10747 24″ Steel Carpenter Square
• Great Neck® 11053 16″ Combination Square
• Great Neck® 10227 6″ Combination Square Carded
• Great Neck® 10440 24″ Aluminum Rafter Square

-Fits into mitre gauge slot of table saw or sharper-Locks work piece in place with comfortable rubber tightening dial-Helps prevent kickbacks-Use with table saws, routers and shapers-Mounts in standard 3/8″ x 3/4″ miter slots-Expandable nuts allow for snu

Click here to buy

More info: Grip 55230 Yellow Featherboard

• Grip 55230 Yellow Featherboard
• Magswitch 8110015 Universal 20mm Featherboard
• Magswitch 8110328 Professional 30mm Table Featherboard
• Magswitch 8110329 Professional 30mm Fence Featherboard
• Kreg Tool KMS7303 Jig and Fixture Bar

Use for securing, towing, or hauling items with fixed load loopsEquipped with latch to ensure that hook stays connectedHeavy duty, drop forged, alloy steel constructionGalvanized to resist corrosionNot intended for overhead lifting

Click here to buy

More info: Grip 23062 5/16″ Clevis Slip Hook with Latch

• Grip 23062 5/16″ Clevis Slip Hook with Latch
• Grip 23040 1/4″ Clevis Slip Hook
• Grip 23055 5/16″ Clevis Grab Hook
• Grip 23052 1/4″ Clevis Grab Hook
• Grip 23060 1/2″ Celvis Grab Hook

Drop forged, heat treated steel High visibility handles makes pliers easy to locate Designed for minimum cable distortion Extra long handles provide maximum cutting leverage and gripping strength Designed to cut 4/0 aluminum and up to 2/0 soft copper 9-1/2″ long

Click here to buy

More info: Grip 57455 9-1/2″ Cable Cutting Pliers

• Grip 57455 9-1/2″ Cable Cutting Pliers
• Irwin® Vise-Grip® 14SG 6″ Soft Grip Long Nose Locking Pliers
• Grip 57049 5-Piece 11″ Long Nose Pliers Set
• Grip 57550 16″ Long Nose Pliers
• K-D Tools KD 3369 Oil Filter Wrench Pliers - Fixed Range 2-3/4″ to 3-1/8″

Eclipse 900-070 is 10 Piece Wrench Set. This set includes 10 wrenches of different sizes for all tightening and loosening applications.

Click here to buy

More info: Eclipse 900-070 10 Piece Wrench Set

• Eclipse 900-070 10 Piece Wrench Set
• K-D Tools KD 9570 7-Piece SAE Stubby Flex GearWrench Set
• K-D Tools KD 9550 10-Piece Metric Stubby Flex GearWrench Set
• Grip 87035 3-Piece Super Grip Adjustable Wrench Set
• Grip 87044 4-Piece Satin Steel Adjustable Wrench Set

M2 high speed steel bits for a wide variety of applications Black industrial finish. 1/2 inch shank, 6 inch long bits

Click here to buy

More info: Grip 35297 12″ HSS Drill Bit Set

• Grip 35297 12″ HSS Drill Bit Set
• Grip 35310 13-Piece Silver/Deming HSS Drill Bit Set
• Grip 35295 5-Pc Super Stubby Drill Bit Set
• Grip 35110 10-Piece 1/8″ Double Ended Drill Bit Set
• Grip 35330 3 pc Hinge Drill Bit Set

Great Neck 35PM PLASTIC MALLET 8 OZ

Click here to buy

More info: Great Neck 35PM PLASTIC MALLET 8 OZ

• Great Neck 55PM 12 oz Plastic Mallet with Wood Handle
• Great Neck 35PM PLASTIC MALLET 8 OZ
• Great Neck 306 6 Piece Assorted Plastic Handle Carving Tools
• Great Neck 350 3-1/2″ Chisel Brick
• Great Neck BGM35 3-1/2″ Butt Gauge & Marker

The Grip 57230 8″ Professional Wire Stripper/Cutter is spring loaded to produce cleaner and accurate cuts. It is designed to tackle anything and everything while working with electronics or electrical applications. It can be used as a crimper, wire stripper, wire cutter, pliers and more.

Click here to buy

More info: Grip 57230 8″ Professional Wire Stripper/Cutter

• Grip 57230 8″ Professional Wire Stripper/Cutter
• Grip 57232 9″ Multipurpose Wire Stripper
• Grip 57222 7″ Pro Wire Stripper and Cutter
• Grip 57248 8″ Professional Electricians Pliers
• Eclipse 200-010 Precision Wire Stripper

Yoke allows for two or three hole applications Applies even pressure to prevent damage to balancer Drop forged, heat treated carbon steel Includes: Yoke, 5″ alloy steel pressure screw 3/4″-16 thread, small centering adaptor, and 10-pc. bolt kit (2 each 5/16″ x 4″, 1/4″ x 3″; 3 each 1/4″ x 2″, 5/16″ x 2″)

Click here to buy

More info: Grip 21400 13-Pc. Harmonic Balancer Puller Set

• Grip 21400 13-Pc. Harmonic Balancer Puller Set
• Grip 21420 46-Piece Harmonic Balancer Puller Kit
• K-D Tools 2286 Harmonic Balancer Puller
• K-D Tools KD 3509 Steering Wheel Lock-Plate Remover and Installer
• Grip 21140 14-Piece Gear Puller and Bearing Splitter Set

The Fein 3-18-21-034-00-7 is a Large Convex Profile. The MultiMaster Large Convex profile provides flexibility in sanding of places which are hard to reach and custom profiles or contours. The Concave profile is perfect for sanding deep grooves, intricate carvings and curved moldings. The profile is ideal for restoration work. The Fein 3-18-21-034-00-7 profile works only with MultiMaster Blade Screw and does not work with the Pad Screw.

Click here to buy

More info: Fein 3-18-21-034-00-7 Large Convex Profile

• Fein 3-18-21-034-00-7 Large Convex Profile
• Fein 3-18-21-035-00-1 Convex (Small) Profile
• Fein 3-18-21-029-00-1 Trapezoidal Profile
• Fein 3-18-21-036-004 Flat Profile
• Fein 6-39-03-205-01-5 Convex Cutter

high Carbon Steel blades-Full tang Blade construction-blades run Straight from The working edge through handle to Nail Setting end-blades individually Ground, polished, mirror finished and clear Coated-The ergo-engineered soft-Grip handles fit user fit For less user fatigue-cushion to absorb shock and perform comfortably during extended Use

Click here to buy

More info: Hyde 06400 3″ Stiff MaxxGrip Heavy-Duty Chisel Scraper

• Hyde 06400 3″ Stiff MaxxGrip Heavy-Duty Chisel Scraper
• Hyde 06250 1-1/4″ Extra Heavy-Duty MaxxGrip Hammer Head Chisel Putty Knife
• Hyde 06350 3″ Flexible MaxxGrip Scraper
• Hyde 06100 1-1/2″ Flexible MaxxGrip Putty Knife
• Hyde 06770 5″ Flexible MaxxGrip Hammer Head Joint Knife

Strong, powerful magnet enclosed in durable steel Excellent for holding pipe in metal in an upright position Use for welding, soldering, and assembly 50 lb. weight capacity

Click here to buy

More info: Grip 85100 Arrow Magnetic Welding Holder (Holds 50 lbs.)

• Grip 85120 Arrow Magnetic Welding Holder (Holds 75 lbs.)
• Grip 85100 Arrow Magnetic Welding Holder (Holds 50 lbs.)
• Grip 85080 Small Arrow Welding Holder - Holds 25 lbs.
• Eclipse 900-099 Soldering Stand w/Reel Holder
• Jet 63142 78B 4″ x 7″ Magnetic Maple Jaw Inserts

Two steel washers give an airtight sealCast aluminum alloy body with heavy duty brass valvesOffset dual chuck allows each chuck easy access to valvesProvides user with dual chucks and controlled inflationEasy to read gauge measures 10-120 PSI in 2 lb. increments12″ heavy duty rubber hose, 6″ chrome plated steel dual chuck

Click here to buy

More info: Grip 10860 HD Tire Inflator W/Gauge

• Grip 10860 HD Tire Inflator W/Gauge
• Ingersoll-Rand IR 327LS Low Speed Air Tire Buffer
• Ingersoll-Rand IR 327 Tire Buffing Tool
• Grip 10778 1/4″ Tire Chuck with Clip
• Grip 83040 6″ Bench Vise with Anvil

8-1/2″ light shade Maximum 150 watt bulb Clamp with protective vinyl sleeve Adjustabkle ball joint Two Conductor polarized 6 foot long cord UL approved

Click here to buy

More info: Grip 37265 Clamp On Work Light with 6 Ft. Cord

• Grip 37265 Clamp On Work Light with 6 Ft. Cord
• Great Neck 33006 36 LED Rechargeable Work Light
• Mantis® 9333 Cord Management Kit
• Makita A-90489 Flashlight Bulb for ML121
• Makita LS1013FL 10 inch Dual Sliding Compound Miter Saw with Laser and Fluorescent Light, 3700 RPM, 15.0 Amps

The 323 12″ Penta Square® has permanently etched scales on a stainless steel blade with multiple angles including 22.5 , 45, 60 and 90.The superior “user friendly” locking mechanism and rotating vial housing aligns to any surface and makes this multiangle square good for all your marking needs.

Click here to buy

More info: Kapro 323-12 12″ Penta Square

• Kapro 323-12 12″ Penta Square
• Kapro 309-08 8″ Legend Carpenter’s Square
• Kapro 309-12 12″ Legend Carpenter’s Square
• Kapro 301-01 Sliding T Bevel With Vial
• Kapro 321-12 12″ Combination Square

Heavy gauge, stainless steel construction with smooth roleld edges Keeps small parts, tools, screws, needles, and bolts where you put them - no more lost bolts! Four 3-1/4″ diamter magnets with rubber covers allows the tray to be attached to any metal base Bright polished dish is easy to clean 10-1/2″ x 11″ x 1-1/4″ depth

Click here to buy

More info: Grip 67442 10-1/2″ x 11″ Magnetic Parts Tray

• Grip 67442 10-1/2″ x 11″ Magnetic Parts Tray
• Grip 67444 6″ x 14″ Magnetic Parts Tray
• Grip 67438 4″ Round Magnetic Parts Tray