Heavy gauge, stainless steel construction with smooth roleld edges Keeps small parts, tools, screws, needles, and bolts where you put them - no more lost bolts! Four 3-1/4″ diamter magnets with rubber covers allows the tray to be attached to any metal base Bright polished dish is easy to clean 10-1/2″ x 11″ x 1-1/4″ depth
More info: Grip 67442 10-1/2″ x 11″ Magnetic Parts Tray
drop forged, galvanized Steel construction -Sectioned plastic storage case -Consists of Screw eyes and Screw hooks, bolts not included.
More info: Grip 43142 151-Pc Eye Bolt Assortment
Heavy gauge, stainless steel construction with smooth rolled edges Keeps small steel parts, tools, screws, needls, and bolts where you put them Brightly finished stainless steel dish is easy to clean 4″ round tray, 1-1/8″ deep
More info: Grip 67438 4″ Round Magnetic Parts Tray
Heavy gauge, stainless steel construction with smooth roleld edges Keeps small parts, tools, screws, needles, and bolts where you put them - no more lost bolts! Three magnets allow the tray to be attached to any metal base 6″ x 14″
More info: Grip 67444 6″ x 14″ Magnetic Parts Tray
14 inch Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
More info: Lenox 23815 14 inch Cast Iron Pipe Wrench
A must have for installing enginesTilts forward, backward and to either side Includes: (4) 10″ chains and (4) 3″ I-bolts
More info: Grip 18200 Load Leveler
Yoke allows two or three hole applications Alloy steel center screw with floating, removable swivel Applies even pressure to balancer, preventing damage Drop forged, heat treated carbon steel Includes: 5″ alloy steel pressure screw 3/4″x16 thread, alloy steel yoke, (2) centering adapters, flat shaft adapter, (3) 1-1/2″ bolts 3/8″x24 thread, (2) 4-1/2″ bolts 3/8″x16 thread, (3) 3-1/2″ bolts 5/16″x18 thread, (2) 2-1/2″ bolts 1/4″x28 thread, (3) 3″ bolts 3/8″x16 thread, (2) 6″ bolts 5/16″x18 thread, (2) 3″ bolts 5/16″x24 thread, (3) 45mm bolts M8×1.25mm, (2) 90mm bolts M8×1/.25mm, (3) 35 mm bolts M10×1.5mm, (2) 65mm bolts M8×1.25mm, and (6) washers in blow molded storage case
Lenox 23824 24″ Cast Aluminum Pipe Wrench is built for Extreme Durability & Comfort. Lightweight cast aluminum handle creates less arm stress. Cast aluminum handle is strong and durable. Hardened teeth are ideal for most hard pipes, bolts and couplings.
More info: Lenox 23824 Pipe Wrench Aluminum 24″
The K-D Tools 2291 is a Crankshaft Pulley & Steering Wheel Puller. The puller removes crankshaft pulleys on Chrysler 2.2 and 2.5-L engines and pulls steering wheels on most US and import cars. The floating swivel on the center screw prevents damage to the steering column. Five sets of side bolts include 3/8-16 UNC, 5/16-18 UNC, 5/16-24 UNF and 8mm x 1.25.
More info: K-D Tools 2291 Crankshaft Pulley & Steering Wheel Puller
18 inch Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
More info: Lenox 23816 18 inch Cast Iron Pipe Wrench
The K-D Tools 2286 is a Harmonic Balancer Puller. The puller removes balancers, pulleys and gears with tapped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hole applications. It has tool bolts to balancer with center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove balancer. Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10 mm x 1.5 screws for most American and imported cars.
More info: K-D Tools 2286 Harmonic Balancer Puller
The K-D Tools KD 9533 is a 8-Piece SAE Reversible Combination Ratcheting GearWrench Set. This wrench set combines the efficiency and flexibility of a reversible ratchet with the added access and safety of a 15 offset wrench. The wrench has an open end wrench at one end and box end wrench at other end. It is reversible with the flip of a lever. No need to remove the GearWrench when working with long bolts or threaded rod. The direction of the wrench can be changed with the simple slide of the thumb. Smooth lever action to make shifting direction easy, even under load. It has all-metal construction for strength and durability. Small box head goes where other ratchet wrenches can not. The SurfaceDrive box end virtually eliminates the rounding of fasteners. Meets or exceeds ANSI, DIN and federal specifications.
More info: K-D Tools KD 9533 8-Piece SAE Reversible Combination Ratcheting GearWrench Set
8 inch Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
More info: Lenox 23812 8 inch Cast Iron Pipe Wrench
The K-D Tools KD 91520 is a 83-Piece 1/4″ & 3/8″ Drive SAE & Metric Socket Set. This set is used for grasping and turning bolts, nuts.
More info: K-D Tools KD 91520 83-Piece 1/4″ & 3/8″ Drive SAE & Metric Socket Set
The K-D Tools KD 9620 is a 12-Piece Metric Reversible Ratcheting GearWrench Set. This wrench set combines the efficiency and flexibility of a reversible ratchet with the added access and safety of a 15 offset wrench. The wrench has an open end wrench at one end and box end wrench at other end. It is reversible with the flip of a lever. No need to remove the GearWrench when working with long bolts or threaded rod. The direction of the wrench can be changed with the simple slide of the thumb. Smooth lever action to make shifting direction easy, even under load. It has all-metal construction for strength and durability. Small box head goes where other ratchet wrenches can not. The SurfaceDrive box end virtually eliminates the rounding of fasteners.
More info: K-D Tools KD 9620 12-Piece Metric Reversible Ratcheting GearWrench Set
-Drop forged-Heat treated steel-Triple chrome plated for durability-Knurled handles on ratchet & breaker bar for a sure grip-6 point socket ensures correct fit & max. surface contact are with bolts for greater torque transfer
More info: Grip 74040 21-Pc 3/4″ Metric Socket Set
Lenox 23821 12″ Cast Aluminum Pipe Wrench is built for Extreme Durability & Comfort. Lightweight cast aluminum handle creates less arm stress. Cast aluminum handle is strong and durable. Hardened teeth are ideal for most hard pipes, bolts and couplings.
More info: Lenox 23821 Pipe Wrench Aluminum 12″
The K-D Tools 3471 is a universal pulley holder. It is designed to trap and hold bolts on pulleys by the mounting bolts on most applications. When the holder is used in conjunction with fan clutch wrenches it is especially useful in removing and replacing thermostatic fan assemblies. This eliminates the need for various size holding wrenches. It is a unique time saving tool.
More info: K-D Tools KD 3471 Universal Pulley Holder
10 inch Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
More info: Lenox 23813 10 inch Cast Iron Pipe Wrench
12 inch Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
More info: Lenox 23814 12 inch Cast Iron Pipe Wrench
The K-D Tools KD 9618 is a 18 mm Reversible Combination Ratcheting GearWrench. This wrench combines the efficiency and flexibility of a reversible ratchet with the added access and safety of a 15 offset wrench. It has an open end wrench at one end and box end wrench at other end. It is reversible with the flip of a lever. No need to remove the GearWrench when working with long bolts or threaded rod. Overall size of box end comparable to most standard combination wrenches. Small box head goes where other ratchet wrenches can not. The SurfaceDrive box end virtually eliminates the rounding of fasteners. Meets or exceeds ANSI, DIN and federal specifications.
More info: K-D Tools KD 9618 18 mm Reversible Combination Ratcheting GearWrench
24″ Cast Iron Pipe Wrench Heavy-duty cast iron design enhances durability for maximum torque Hardened teeth are ideal for most hard pipes bolts and couplings Grips Tightly
Lenox 23823 18″ Cast Aluminum Pipe Wrench is built for Extreme Durability & Comfort. Lightweight cast aluminum handle creates less arm stress. Cast aluminum handle is strong and durable. Hardened teeth are ideal for most hard pipes, bolts and couplings.
More info: Lenox 23823 Pipe Wrench Aluminum 18″
The K-D Tools 3510 is a Set of 2 GM Steering Wheel Puller Legs. It is used in conjunction with the SER 2291 Steering Wheel Puller to remove steering wheels on late model GM vehicles that are not pre-drilled to receive standard bolts. The applications include Cadillac 1997 and new Catera Chevrolet/GMC 1997 and newer Malibu, Corvette, 1998 and newer C- and K- series trucks, full-sized vans, Astro/Safari vans Buick 1997 and newer Park Avenue and Regal Oldsmobile 1997 and newer Cutlass Pontiac 1988-1993 LeMans, 1997 and newer Grand Prix and Trans Sport Van. It includes bushing to cover the following applications Ford: 1997-Current Explorer, Ranger, Pickups Chrysler 1999 Jeep Grand Cherokee.
More info: K-D Tools 3510 GM Steering Wheel Puller Legs
Bend materials up to 17 gauge steel and make up to 90 degree bends Will bend material up to 30″ wide Designed for benchtop mounting using four 3/8″ bolts Make adjustments quickly and easily using a protractor Dimensions - 34-1/2″L x 6″W x 2-7/8″H
More info: Grip 81120 30″ Bending Brake
10 inch Cast Aluminum Pipe Wrench Lightweight but strong and durable cast aluminum handle creates less arm stress Hardened teeth are ideal for most hard pipes, bolts and couplings Reduces hand fatigue Grips Tightly
The K-D Tools KD 9619 is a 19 mm Reversible Combination Ratcheting GearWrench. This wrench combines the efficiency and flexibility of a reversible ratchet with the added access and safety of a 15 offset wrench. It has an open end wrench at one end and box end wrench at other end. It is reversible with the flip of a lever. No need to remove the GearWrench when working with long bolts or threaded rod. Overall size of box end comparable to most standard combination wrenches. Small box head goes where other ratchet wrenches can not. The SurfaceDrive box end virtually eliminates the rounding of fasteners. Meets or exceeds ANSI, DIN and federal specifications.
More info: K-D Tools KD 9619 19 mm Reversible Combination Ratcheting GearWrench
Lenox 23822 14″ Cast Aluminum Pipe Wrench is built for Extreme Durability & Comfort. Lightweight cast aluminum handle creates less arm stress. Cast aluminum handle is strong and durable. Hardened teeth are ideal for most hard pipes, bolts and couplings.
More info: Lenox 23822 Pipe Wrench Aluminum 14″
The K-D Tools KD 9532 is a 3/4″ Reversible Combination Ratcheting GearWrench. This wrench combines the efficiency and flexibility of a reversible ratchet with the added access and safety of a 15 offset wrench. It has an open end wrench at one end and box end wrench at other end. It is reversible with the flip of a lever. No need to remove the GearWrench when working with long bolts or threaded rod. Overall size of box end comparable to most standard combination wrenches. Small box head goes where other ratchet wrenches can not. The SurfaceDrive box end virtually eliminates the rounding of fasteners. Meets or exceeds ANSI, DIN and federal specifications.
More info: K-D Tools KD 9532 3/4″ Reversible Combination Ratcheting GearWrench
Ingersoll-Rand IR212 is a 3/8″ Super Duty Air Impact Wrench. Tremendous power and longer life make this wrench the popular choice of professional mechanics for exhaust systems, Air conditioning, radiators, body shop, and bench work. Still the most powerful 3/8″ pistol-grip on the market, it offers all the advantages of the Single Hammer Impact Mechanism for removing and replacing bolts up to 7/16″ without a struggle.
More info: Ingersoll-Rand IR 212 3/8″ Super Duty Impact Wrench
The Fein MultiMaster FMM 250 Start is a variable speed MultiMaster Start Sander Kit. The Fein MultiMaster FMM 250 offers a 250 Watts motor which gives an oscillation of 11000 to 20000/min and allows the full range of MultiMaster accessories to be used. The body is ergonomically designed with a soft grip insert which ensures excellent handling. This Fein Multimaster is supplied with 5m of cable and a selection of accessories Sanding pad (unperforated), 5 off 80, 120 and 180 grit sanding sheets (unperforated), rigid stopping knife, universal E-cut saw blade, key and mounting bolts.
More info: Fein Multimaster FMM250START Start Sander Kit, 250 Watts
The Makita 6905H is a 1/2 inch Square Drive Impact Wrench. It provides 2600 IPM and 2200 RPM for fast tightening and loosening of bolts.
More info: Makita 6905H 1/2 inch Square Drive Impact Wrench, 6.0 Amps, 2600 IPM
The Fein Multimaster FMM250QTOP is a Multimaster Top Quick Action System. The Fein Multimaster FMM250QTOP features a new quick release blade mechanism which does not require the use of allen keys or bolts. The tool mounting is star shaped to prevent the blade from creeping when cutting. The variable speed head oscillates in an arc of 3.2 at a rate of 14000-21000 movements per minute and the speed can be set to suit the task being performed. Benefiting from a larger motor than its predecessor, the new Fein Multimaster has a 250 Watts high torque motor which allows it to cut metals as well as wood.
More info: Fein Multimaster FMM250QTOP Top Quick Action System, 250 Watts
|
More:           Search ToolsAdvisor.com: |
Translate Page:
More Power Tools Info:
Power Tools Categories:
    
|
