Worm clamp gear type clamps Zinc plated Use for securing hoses around pipes - great for securing hoses in automotive applications Includes: (2) 2-3/4″, (6) 1-3/4″, (2) 2-1/2″, (6) 1-1/2″, (4) 2-1/4″, (6) 1-1/4″, (4) 2″, and (4) 1-16″ diameter clamps
More info: Grip 55166 34-Piece Hose Clamp (Worm Clamp) Assortment Kit
Quickly grounds arc welders when welding ferrous metals Magnet grounds to surfaces that clamps cannot Professional quality 4″ diameter
More info: Grip 85245 4″ Magnetic Ground Block
Holds parts firmly for guing, nailing, frilling, welding, cutting, and bending Super heavy duty for either industrial or commercial use Sliding T-bar handles, malleable steel frames Chrome plated steel screw and swivel pad Includes one each - 3″, 4″, and 5″ clamps
More info: Grip 31138 3-Piece Heavy Duty C-Clamp Set
The K-D Tools 3191 is a CV Joint Boot Clamp Tightening Wrench. The wrench is used to securely fasten Band-it style free end clamps, roll band and clips or Band-it Jr. style pre-formed CV Boot Clamps. The tool is used by turning the winding mandrel with a 1/2″ socket or wrench. The mandrel tightens the clamp, holding it in place until the ears of the clamp are folded down.
More info: K-D Tools 3191 CV Joint Boot Clamp Tightening Wrench
For carving Tools and other Short Tools-clamps Narrow or butt chisels firmly-Internal vee Shape Automatically centres The Tool-power carving blades can be sharpened on The Jet Wetstone
More info: Jet 708025 CTJ-1 Carving Tool Jig for JSSG-10 Slow Speed Wet Sharpener
-Intelligent technology for precise working-Hard-anodized surface-Soft, non-slip coating-Hard rubber splinter guard-Mounting slot for FSW angle unit, 2 FSV connectors, FSZ clamps, FS-AW Deflector-Prevents delicate plywood veneer from chipping out
More info: Festool 491498 FS 1400/2 55″ Guide Rail
The Festool 489571 is a pack of two 300 mm Clamps. These clamps slide into guide rail groove for securing guide rails.
More info: Festool 489571 300 mm Clamps (2 Pack)
-The JET Parallel Clamps have unique features not found in regular clamps. The design allows for precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure which minimizes the tendency of warping and distortion of the workpiece. The mo
More info: Jet 70412 12″ Parallel Clamp
The Jet Cross Doc is The must need accessory For The Jet Parallel clamps. The Cross Doc is designed For projects like cabinets, Frames, and doors
More info: Jet 70401 Four Pack of Framing Blocks
-Intelligent technology for precise working-32 mm holes for use with LR 32 hole drilling system-Hard-anodized surface-Soft, non-slip coating-Hard rubber splinter guard-Mounting slot for FSW angle unit, 2 FSV connectors, FSZ clamps, FS-AW Deflector-Prevent
More info: Festool 491621 FS 1080/2-LR32 42″ Guide Rail for hole series
The Festool 489570 is a pack of two 120 mm Clamps. These clamps slide into guide rail groove for securing guide rails.
More info: Festool 489570 120 mm Clamps (2 Pack)
An extension bar that clamps onto the sharpener using the tool rest support and allows for controlled grinding using the side of the grinding wheel.
More info: Jet 708027 SWGJ-1 Side Wheel Grinding Jig For Model JSSG-10 Slow Speed Wet Sharpener
-The JET Parallel Clamps have unique features not found in regular clamps. The design allows for precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure which minimizes the tendency of warping and distortion of the workpiece. The mo
More info: Jet 70424 24″ Parallel Clamp
-Face Clamps™ ensure a perfectly flush joint every time.-Without clamping the joint can misalign if the screw follows the grain, but Face Clamps™ keep the work pieces in alignment regardless of the screw’s trajectory.-The large pad of the clamp keeps
More info: Kreg SFCR Standard Face Clamp (2″ Reach)
Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw.M/p
More info: Kreg PFC Premium Face Clamp
-The JET Parallel Clamps have unique features not found in regular clamps. The design allows for precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure which minimizes the tendency of warping and distortion of the workpiece. The mo
More info: Jet 70431 31″ Parallel Clamp
6″ reachFace clamps insure a flush joint every time.Without clamping the joint can mis-align if the screw follows the grain, it keep the work pieces in alignment regardless of the screw’s trajectory.For flat stock, such as face frames, mitered picture frames and other similar joints the face clamp is a fast and simple solution.Non-marringIncludes 1
More info: Kreg LFC Large Face Clamp (6″ Reach)
-Metal storage tray can be mounted on machine or wall-Three complete sets to choose from-Kit includes 52-pieces of nuts, Clamps and Studs
More info: Jet 660012 Clamping Kit 52-pc with Tray for 9/16″ and 5/8″ T-slot
-Intelligent technology for precise working-Hard-anodized surface-Soft, non-slip coating-Hard rubber splinter guard-Mounting slot for FSW angle unit, 2 FSV connectors, FSZ clamps, FS-AW Deflector-Prevents delicate plywood veneer from chipping out
More info: Festool 491937 FS 2700/2 106″ Guide Rail
|
More:          Search ToolsAdvisor.com: |
Translate Page:
More Power Tools Info:
Power Tools Categories:
    
|
