For best results an axe needs to have both sides ground evenly and equally. This can prove quite tricky to achieve by hand, but with this jig both sides can be ground to an ‘as new’ factory evenness and at the same time achieve keen edges, without the danger of overheating the metal. Side axes can also be sharpened, by grinding one bevel with the tool rest set for the initial bevel and then raised for the ‘offside’ bevel.
Click here to buy
More info: Jet 708031 AJ-1 Axe Jig for Model JSSG-10 Slow Speed Wet Sharpener
These screws from Kreg are quite unique in that they have a self-drilling auger point that cleanly drills into any solid, composite, or plywood with ease. Two different thread pitches are available, fine for hardwood and coarse for softwood, composite and plywood. This starter kit contains five of the most popular screw sizes and types. Screws are packed in an impact resistant plastic case which is illustrated with each screw type and has an application guide. Using these screws with Kregs pocket joint jig will enable even a novice woodworker to make strong, tight joints on the first try.
Click here to buy
More info: Kreg SML-C250-B50 Blue-Kote Weather Resistant Screws
The Jet 708041 AMD-2 is a Chisel Angle Jig for JSSG-10 Slow Speed Wet Sharpener. The Chisel Angel Jig is used to establish the angle of a tool’s cutting edge. It accurately measures an existing bevel angle and checks progress when re-grinding a new an
Click here to buy
More info: Jet 708041 AMD-2 Chisel Angle Jig for JSSG-10 Slow Speed Wet Sharpener
The Magswitch 8110339 Vertical Attachment offers further flexibility to the professional woodworker. Designed for use with the Magswitch 8110328 Professional Table Featherboard (sold separately), it aids in provided steady downward pressure to your stock material. The 8110339 can also used independently in a miter slot or custom made jig.
Click here to buy
More info: Magswitch 8110339 Vertical Attachment
Magswitch Mag Jigs are revolutionizing woodworking and tabletop workholding. The Magswitch 8110005 30mm Mag Jig you get a fast, easy, and strong set up. There will be no more hassles trying to secure jigs on a work table. The 8110005 30mm Mag Jig works on any steel surface table or woodworking table tool (table saws, jointers, shapers, band saws, etc.). Unlike C-clamps and other conventional holding and clamping tools, the Magswitch 8110005 gives you the flexibility to place it anywhere on the table. Using two or more on a jig is ideal. The Mag Jig has other uses, too, such as picking up nails or holding screws - the possibilities are endless!
Click here to buy
More info: Magswitch 8110005 30mm Mag Jig
For carving Tools and other Short Tools-clamps Narrow or butt chisels firmly-Internal vee Shape Automatically centres The Tool-power carving blades can be sharpened on The Jet Wetstone
Click here to buy
More info: Jet 708025 CTJ-1 Carving Tool Jig for JSSG-10 Slow Speed Wet Sharpener
Fully adjustable for sharpening many different types of gouge. In particular certain woodturning gouges which have long bevels or extended bevels. With this jig this more complicated geometry is straight forward and more importantly, repeatable time and time again. New tools can be ground into improved profiles or to the users preferred shape. Just as important the Gouge jig helps ensure a symmetrical grind, preferable to a lop-sided tool any day.
Click here to buy
More info: Jet 708020 GT-1 Gauge Jig for JSSG-10 Slow Speed Wet Sharpener
Puts an even, slight radius onto a Hand plane iron-especially good For scrub and Jack plane irons-Camber makes It quicker to remove excess with less effort-First jig of its kind that can produce this type of grind
Click here to buy
More info: Jet 708032 PCJ-1 Plane Camber Jig
-Long knife jig for JSSG-10 Slow Speed Wet Sharpener-Fully Adjustable
Click here to buy
More info: Jet 708021 LKJ Long Knife Jig
For General purpose knives, paring knives etc.-allows For The acute bevels to be Ground with ease-Blade is securely clamped-fine adjustment by turning jig handle
Click here to buy
More info: Jet 708019 KJ-1 Knife Jig
An extension bar that clamps onto the sharpener using the tool rest support and allows for controlled grinding using the side of the grinding wheel.
Click here to buy
More info: Jet 708027 SWGJ-1 Side Wheel Grinding Jig For Model JSSG-10 Slow Speed Wet Sharpener
This jig quickly restores a keen edge to all those old pairs of blunt scissors that have been lying around for years. As an added bonus it can be used to sharpen garden shears for the start of the hedge cutting season. Twin clamps secure the blade firmly.
Click here to buy
More info: Jet 708026 SJ-1 Scissors Jig For Model JSSG-10 Slow Speed Wet Sharpener
Magswitch Mag Jigs are revolutionizing woodworking and tabletop workholding. The Magswitch 8110004 20mm Mag Jig you get a fast, easy, and strong set up. There will be no more hassles trying to secure jigs on a work table. The 8110004 20mm Mag Jig works on any steel sturface table ot woodwordking table tool (table saws, jointers, shapers, band saws, etc.). Unlike C-clamps and other conventional holding and clamping tools, the Magswitch 8110004 gives you the flexibility to place it anywhere on the table. Using two or more on a jig is ideal. The Mag Jig has other uses, too, such as picking up nails or holding screws - the possibilities are endless!
Click here to buy
More info: Magswitch 8110004 20mm Mag Jig
The Jet 708029 SEJ-1 is a Straight Edge Jig for JSSW-10 Slow Speed Wet Sharpener. The Straight Edge Jig mounts on the support arm and is used to sharpen chisels, spokes have blades and planer blades.
Click here to buy
More info: Jet 708029 SEJ-1 Straight Edge Jig for JSSW-10 Slow Speed Wet Sharpener
