Drop forged, heat treated, steel for maximum strength.Black oxide finish resists rust and corrosion.Removes headless & hard to get to nails.Bites into nail shank.One piece heavy duty stell with two claw ends.Length: 12 inches.
More info: Grip 60050 12 inch Nail Puller Pry Bar
-Plastic handle with rustproof plated blade firmly imbedded-Full 1/4″ thick heavy duty shank lifts tacks, small nails, brads-Smoothly polished back and face-Carded
More info: Great Neck TL4C Tack Lifter
The Grip 60056 is a 15″ Curved Pry Bar. The curved pry bar has black oxide finish which resists rust and corrosion. The curved body allows access to confined working areas and each end features a nail puller for stuck and broken nails. It is manufactured from heat treated steel for maximum strength.
More info: Grip 60056 15″ Curved Pry Bar
This is a Fein 6-35-02-151-01-8 1 1/8″ Universal E - Cut Blade 1pk. The M-Cut Blade looks similar to the E-Cut but capable of cutting finish nails and thin metal.
This is a Fein 6-35-02-106-01-5 3 1/8″ HSS Segmented Cutting Blade. This is a High Speed Steel saw blade with segmentation on one side. The High Speed Steel material is more rigid allowing the blade to cut through sheet metal up to 1.0 mm thick as well as harder wood, carbon fiber, fiberglass, and nails. The segmentation enables cuts to be made at right angles without over cutting.
More info: Fein 6-35-02-106-01-5 3 1/8″ HSS Segmented Cutting Blade
Magswitch Mag Jigs are revolutionizing woodworking and tabletop workholding. The Magswitch 8110005 30mm Mag Jig you get a fast, easy, and strong set up. There will be no more hassles trying to secure jigs on a work table. The 8110005 30mm Mag Jig works on any steel surface table or woodworking table tool (table saws, jointers, shapers, band saws, etc.). Unlike C-clamps and other conventional holding and clamping tools, the Magswitch 8110005 gives you the flexibility to place it anywhere on the table. Using two or more on a jig is ideal. The Mag Jig has other uses, too, such as picking up nails or holding screws - the possibilities are endless!
More info: Magswitch 8110005 30mm Mag Jig
The Makita AF505 is a 2 inch 18 Gauge Brad Nailer. It drives a range of 18 gauge brad nails, from 5/8 inch to 2 inch, into hard or soft wood applications; magazine application is up to 100 nails. The quick release cam-lock opens nail guide assembly to easily clear jammed nails and the efficient design minimizes downtime. It has easy to use “tool-less” depth adjustment dial for a wide variety of finish applications. The non-marring rubber nose and bumpers protect the wood’s surface from being scratched or damaged.
More info: Makita AF505 2 inch 18 Gauge Brad Nailer, 60-115 PSIG
This is a 2-1/2-inch aggressive plunge cutting saw blade for the Multimaster. This blade has a Japanese pull saw tooth pattern that allows for very aggressive cutting in wood and other materials. Use this blade in place of a handsaw or jamb saw when there’s not a lot of room to maneuver. This blade is perfect for doorjambs, baseboards, toe kicks and flooring work. Avoid materials that might contain nails.
More info: Fein 6-35-02-127-01-7 MultiMaster 2-1/2″ E-Cut Blade
Thin and sleek plastic case keeps tools from being misplaced or lost8 oz. claw hammer LevelScrewdriver Adjustable wrenchPutty knifeTape measure Slip joint pliersEight-pieceSAE hex driver set8-piece MM hex driver setSet includes nails, screws, and picture hangers
More info: Grip 96030 30-Piece Women’s Tool Kit
The Grip 14008 is a 2 in 1 Air Nailer and Stapler Kit. The Nailer/Stapler gun features a strong yet lightweight die cast body. It handles staples up to 1″ long and brad nails up to 2″ long. The single sequential safety trip mechanism protects the user. It is used to install window frames, door frames, molding and more
More info: Grip 14008 2 in 1 Air Nailer and Stapler Kit, 60 to 100 PSI, 100 Nails
Nail Length regulator Automatically sets nails to desired pin Length-used to install window Frames, Door Frames, molding and more-single sequential safety trip mechanism-depth adjustment For flush or below level
More info: Grip 14012 1/2″ to 1″ Air Pin Nailer, 23 Gauge, 120 PSI
This is a Fein 6-35-02-133-01-7 E-Cut 1 3/8″ (Pack of 1). This is a 1-3/8″ plunge cutting saw blade for the Fein MultiMaster. This blade has smaller teeth to provide for better control and longer blade life. The smaller tooth pattern allows the blade to hit a brad nail in flooring without destroying the blade. Use this blade in place of a handsaw or jamb saw when there’s not a lot of room to maneuver. This blade is perfect for doorjambs, baseboards, toe kicks and flooring work. Avoid material that might contain nails.
This is a full round saw blade with a 3-1/8″ diameter made of High Speed Steel to provide for longer life and better cutting ability. The High Speed Steel material is more rigid allowing the blade to cut through sheet metal up to 1.0 mm thick as well as harder wood and nails. The full round nature of the blade provides for much longer life because of the ability for blade rotation.
More info: Fein 6-35-02-097-02-7 MultiMaster 3-1/8″ HSS Saw Blade
This is a Fein 6-35-02-134-01-5 E-Cut 2 1/2″ (Pack of 1). This is a 2-1/2-inch plunge cutting saw blade for the Fein MultiMaster. This blade has smaller teeth to provide for better control and longer blade life. The smaller tooth pattern allows the blade to hit a brad nail in flooring without destroying the blade. Use this blade in place of a handsaw or jamb saw when there’s not a lot of room to maneuver. This blade is perfect for doorjambs, baseboards, toe kicks and flooring work. Avoid material that may contain nails.
Magswitch Mag Jigs are revolutionizing woodworking and tabletop workholding. The Magswitch 8110004 20mm Mag Jig you get a fast, easy, and strong set up. There will be no more hassles trying to secure jigs on a work table. The 8110004 20mm Mag Jig works on any steel sturface table ot woodwordking table tool (table saws, jointers, shapers, band saws, etc.). Unlike C-clamps and other conventional holding and clamping tools, the Magswitch 8110004 gives you the flexibility to place it anywhere on the table. Using two or more on a jig is ideal. The Mag Jig has other uses, too, such as picking up nails or holding screws - the possibilities are endless!
More info: Magswitch 8110004 20mm Mag Jig
-Light weight only 5.3 lbs-Small and compact, tool height less than 13″-Anti-double fire mechanism (US Patent 5597106)-New design recoil reduced valve (PAT.P)-Dial adjustable depth control-Unique tangle free swivel fitting
More info: Max HN90 2″ - 3-1/2″ PowerLite Coil Framing Nailer, 170 - 320 PSI, 300 Nails
AF505 2 inch Brad Nailer:Cast and machined nose piece for precise contactQuick release cam-lock opens nose assembly to clear jammed nails”Tool-less” depth adjustment drives nails to the precise levelMAC700 Air Compressor - 2.0 HPOil lubricated pump runs quietly and reliablyFinned discharge tubing dissipates heat efficientlyLow Amps draw reduces instances of tripped breakers
The Makita AN922 is a 2 inch - 3-1/2 inch Round-Head Framing Nailer. It weighs only 8.4 lbs which is less than the competition and has more power to drive nails into the toughest building materials. It has a large capacity air chamber for increased power. The tool features a depth setting knob for easy adjustment of 9 nailing depths. A Non-marring auxiliary none piece protects the work piece and stores conveniently on tool. It is easy to load a magazine, just insert nails and pull back on pusher block. The ergonomic handle with rubber grip gives comfort to the user.
More info: Makita AN922 2 inch - 3-1/2 inch Round-Head Framing Nailer, 65 - 120 PSIG
The Makita AF633 is a 1-1/4 inch - 2-1/2 inch Finish Nailer. The easy-loading, rugged and lightweight aluminum magazine provides maximum durability as does the die-cast tool housing. The AF633 from Makita is capable of firing 1-1/4 inch to 2-1/2 inch finish nails and boasts a 120 nail load capacity. Its easy-to-use depth adjustment dial means work can be carried with a wide variety of finish applications and get precise fastening. A multi-directional exhaust vent directs the airflow away from the operator. The tool also features an easy access nosepiece with quick release cam-lock, an ergonomic rubber grip for comfortable operation and a rubber non-slip body bumper that protects the tool housing and the work piece.
More info: Makita AF633 1-1/4 inch - 2-1/2 inch Finish Nailer, 65-120 PSI
The Makita AN942 is a 2 inch - 3-1/2 inch Clipped Head Framing Nailer. It weighs only 8.4 lbs yet is a sturdy framing nailer. The Makita AN942 fires 2 inch to 3-1/2 inch standard clipped head stick nails. The easy load rugged aluminum magazine is simple and easy to use just as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time and the 9 quick-dial depth adjustment settings give user precise control of nail depth. Designed with a contoured handle with a conforming rubber grip for operator comfort and a three mode selector switch for either “bump” or “sequential” operation and an “off” setting for safe transporting.
More info: Makita AN942 2 inch - 3-1/2 inch Clipped Head Framing Nailer, 65 - 120 PSIG
-Powered by 400psi high pressure system-Anti-double fire mechanism-New design recoil reduced valve-Trigger Lock for safetyDrives from 1-1/4″ up to 2-1/2″ flat plastic sheet collated nails
More info: Max HN75 1-1/4″ Coil Framing Nailer, 170 - 320 PSI, 300 Nails
-Well balanced with the lightest weight in its class-Anti-double fire mechanism (US Patent 5597106)-Accepts both flat wire welded and plastic sheet collated nail-Dial adjustable depth control-No-mar contact tip included-Multi-directional exhaust cover-Mai
More info: Max CN565S SuperSider 1-3/4″ - 2-1/2″ Siding Coil Nailer, 60-100 PSI, 200 - 400 Nails
The Makita AN922 is a Factory Reconditioned 2 inch - 3-1/2 inch Round-Head Framing Nailer. It weighs only 8.4 lbs which is less than the competition and has more power to drive nails into the toughest building materials. It has a large capacity air chamber for increased power. The tool features a depth setting knob for easy adjustment of 9 nailing depths. A Non-marring auxiliary none piece protects the work piece and stores conveniently on tool. It is easy to load a magazine, just insert nails and pull back on pusher block. The ergonomic handle with rubber grip gives comfort to the user.
More info: Makita AN922 Factory Reconditioned 2 inch - 3-1/2 inch Round-Head Framing Nailer, 65 - 120 PSIG
anti-dry fire mechanism-Easy side loading system-high capacity of pin Length without adjustment on Tool-pin indicator on The magazine-Belt hook-comfortable rubber Grip-double trigger For safety
More info: Max NF235A 1-3/8″ Pin Nailer, 60 - 100 PSI, 100 Nails
-Compact design only 12-1/4" in height -Selective trigger system -Open Nose for easy jam clearance -Dial adjustable depth control -Pointy teeth on contact arm -Maintenance free end cap filter (US Patent 5637125) -Comfortable rubber grip
More info: MAX SN883CH/34 Clipped Head Nailer for Paper Collated Stick Nails, 70 - 100 PSI, 90 Nails
The Max CN601J is a 1-1/2″ to 2-1/2″ Positive Placement Coil Nailer. The Max CN601J is very unique coil nailer designed for hardware fastening. The point of the nail is appeared at the nose tip and it is easy to locate the nail into the hole of metal connectors. The nailer pulls a nail from collation and holds firmly in nose. This allows to find the hole of the metal connector easily with the nail. After the first nail is driven the second nail is fed to the nose muzzle automatically and ready to drive.
More info: Max CN601J 1-1/2″ - 2-1/2″ Positive Placement Coil Framing Nailer, 70 - 100 PSI, 100 Nails
|
More:           Search ToolsAdvisor.com: |
Translate Page:
More Power Tools Info:
Power Tools Categories:
    
|
