The Flex 259817 is a 5-pack of 100-Grit Drywall Sanding Pads. The sanding pads in the 259817 are 8-7/8″ (225 mm) in diameter and have a foam backing. These pads can be used with a variety of sanders, including the Flex WS702VE or the Porter-Cable 7800.These sanding pads should NOT be used at speeds over 2,000 RPM
More info: Flex 259817 8-7/8 Inch 100-Grit Drywall Sanding Pads - 5 Pack
The Flex 259819 is a 5-pack of 150-Grit Drywall Sanding Pads. The sanding pads in the 259819 are 8-7/8″ (225 mm) in diameter and have a foam backing. These pads can be used with a variety of sanders, including the Flex WS702VE or the Porter-Cable 7800.These sanding pads should NOT be used at speeds over 2,000 RPM
More info: Flex 259819 8-7/8 Inch 150-Grit Drywall Sanding Pads - 5 Pack
Professional quality Made for a wide range of grinding, shaping, and cutting jobs Maximum operating speed of 80M per second. 13,000 max. RPM. Ten 4-1/2″ x 1/4″ x 7/8″ grinding wheels
The Flex 259820 is a 5-pack of 180-Grit Drywall Sanding Pads. The sanding pads in the 259820 are 8-7/8″ (225 mm) in diameter and have a foam backing. These pads can be used with a variety of sanders, including the Flex WS702VE or the Porter-Cable 7800.These sanding pads should NOT be used at speeds over 2,000 RPM
More info: Flex 259820 8-7/8 Inch 180-Grit Drywall Sanding Pads - 5 Pack
The Flex 259818 is a 5-pack of 120-Grit Drywall Sanding Pads. The sanding pads in the 259818 are 8-7/8″ (225 mm) in diameter and have a foam backing. These pads can be used with a variety of sanders, including the Flex WS702VE or the Porter-Cable 7800.These sanding pads should NOT be used at speeds over 2,000 RPM
More info: Flex 259818 8-7/8 Inch 120-Grit Drywall Sanding Pads - 5 Pack
Professional qualityMade for a wide range of grinding, shaping, and cutting jobsMaximum operating speed of 80M per second. 13,000 max. RPM.Includes: 2 pc 4-1/2″ x 1/4″ x 4/8″ depressed center metal grinding wheels, 5 pc 4-1/2″ x 1/16″ x 7/8″ metal cut off wheels, and 2 pc 4-1/2″ x 1/8″ x 7/8″ masonry cut off wheels
Aluminum oxide cutting wheels cut through steel rods, sheet metal, and muffler clamps Fits most air cut off tools General purpose medium/coarse wheel is formulated for fast, high quality dry cutting 40/60 dual grit. 19,000 max. RPM.
More info: Grip 86030 3″ Cut Off Wheels - Pkg. of 10
Aluminum oxide cutting wheels cut through steel rods, sheet metal, and muffler clamps Fits most air cut off tools General purpose medium/coarse wheel is formulated for fast, high quality dry cutting 40/60 dual grit. 19,000 max. RPM.
The Flex 259821 is a 5-pack of 220-Grit Drywall Sanding Pads. The sanding pads in the 259821 are 8-7/8″ (225 mm) in diameter and have a foam backing. These pads can be used with a variety of sanders, including the Flex WS702VE or the Porter-Cable 7800.These sanding pads should NOT be used at speeds over 2,000 RPM
More info: Flex 259821 8-7/8 Inch 220-Grit Drywall Sanding Pads - 5 Pack
The Makita 9005B is a 5 inch angle grinder powerful 9 Amp motor which delivers 10000 RPM. The powerful yet light weight grinder ensures high production work with less fatigue.
More info: Makita 9005B 5 inch Angle Grinder, 10000 RPM, 9.0 Amps
The Makita 6825 is a Variable Speed Reversible Drywall Screwdriver. The Rocket actually operates between 0-6000 RPM, 50% faster than most screwguns, which max out at 4000 RPM. The new screwgun features a 6.5 Amp motor with plenty of torque. Sealed ball-bearing construction ensures the gun will run smoothly at the higher speeds, without harm from drywall dust. The tool’s larger trigger also incorporates a sealed switch that protects it from dust.
More info: Makita 6825 Variable Speed Reversible Drywall Screwdriver, 0-6000 RPM, 6.5 Amps
The Ingersoll-Rand IR7807R is a 3/8″ Standard Duty Angle Head Reversible Air Drill. The 7807R is an excellent choice for service work requiring a compact, low profile angle head. It is a durable, reliable tool for drilling in all types of materials, including sheet metal, wood and composites.
More info: Ingersoll-Rand 7807R 3/8″ Standard Duty Angle Head Reversible Air Drill, 1800 RPM, 17 CFM
Ingersoll-Rand IR312 is a 3-2/3″ X 6-3/4″ Heavy Duty Air Orbital Sander. The 312 air orbital sander has a free speed up to 8,000 rpm to make fast work of smoothing fiberglass, wood, and body filler and to take care of any sanding job on paint, metal, and fiberglass. And you can run the IR312 with one hand, using the compact, contoured palm-grip.
Complete set for all applications requiring cut off tools Free speed: 20,000 RPM. Air pressure: 90 psi. Air consumption: 5 CFM. Air inlet: 1/4″ NPT. Collet: 1/4″ and 1/8″. Includes: Cut off tool, (2) cutting wheels, (10) mounted grinding stones, safety guard, (2) open end wrenches, cutting wheel shank, allen wrench, nipple, (2) collets, grinding stone holder, and blow molded storage case
More info: Grip 14165 Air Die Grinder and Cut-Off Tool
The Makita DP4000 is a factory reconditioned 1/2 inch variable speed reversible drill has powerful 7 Amp motor which delivers 0-900 RPM and ensures heavy-duty industrial performance. It features metal housing and rubber handle for durability and control.
More info: Makita DP4000 Factory Reconditioned Heavy-Duty 1/2 inch Variable Speed Reversible Drill
Ingersoll-Rand IR326 is a Heavy Duty Air Cut-Off Tool. Exhaust replacement is this powerful tool’s specialty. It is useful to cut off mufflers and tail pipes quickly, efficiently, and quietly. It has an 18000 rpm motor that can handle the toughest exhaust replacements and cut sheet metal, nuts and bolts.
More info: Ingersoll-Rand IR 326 Air Cut Off Tool
The Makita 9557PB 4-1/2″ Angle Grinder has an extremely high power-to-weight ratio, making it a favorite for any job. It is capable of reaching 10,000 RPM, but only weighs 3.87 lbs. You don’t have to worry about being able to handle this thing. The barrel grip is easy to grip with one hand and the paddle switch is large for easy handling. The motor of the 9557PB is protected by a series of channels to keep it dust-free and extend the life of the grinder.
More info: Makita 9557PB 4-1/2 Inch Angle Grinder with AC/DC Paddle Switch
-Higher speeds 5,000 - 35,000 rpm, same as Dremel corded models -Battery fuel gauge lets you know when its time to recharge -High capacity 10.8V Lithium-Ion battery pack for longer run times -Small and lightweight for easier handling and less fatigue
More info: Dremel 8000-02 10.8 Volt Lithium-Ion 5,000 - 35,000 RPM Cordless Rotary Tool
The Makita 3606 is a 1 HP Router. The router has a large calibrated depth control ring along with contoured double handles for comfort and control. The router is great for any worksite. It also features all ball bearing construction for longer tool life. Its shaft lock means quick bit changes with just one wrench. It’s beefy, high-speed 3-1/2 inch diameter detachable motor is fantastic for use on commercial router bases.
More info: Makita 3606 1 HP Router, 30000 RPM, 7.0 Amps
Large trigger switch for easy operationVariable speed (0-2500 RPM) for drilling in a wide variety of materialsIn-line handle design for better controlLarge recessed lock-on buttonReversing switch is conveniently locatedAll ball bearing construction for durability and long tool life
More info: Makita 6407 3/8 inch Variable Speed Reversible Drill with Keyed Chuck, 0-2500 RPM, 4.9 Amps
The Makita N1900B is a 3-1/4 inch Planer with Case, 15000 RPM, 4.0 Amps. A redesigned 4 Amp motor delivers more output power for increased performance. It features centering balance with front and rear grips positioned for better control that helps eliminate gouging and uneven planing.
More info: Makita N1900B 3-1/4 inch Planer with Case, 15000 RPM, 4.0 Amps
The Hitachi DS14DVF3 is a 14V 3/8 inch Driver Drill Kit with Flashlight. It incorporates a fresh new look along with increased power. The max torque is 300 in-lbs and the two-speed transmission runs at 0-400 in low and 0-1200 in high. A 3/8 inch keyless chuck allows for quick bit changes without the fear of bit slippage. The kit comes complete with a 35-minute charger, 2 batteries, a bit set, a flashlight and a carrying case.
More info: Hitachi DS14DVF3 14V 3/8 inch Driver Drill Kit with Flashlight, 1200 RPM
Ingersoll-Rand IR327 is a Heavy Duty Air High-Speed Tire Grinder. With a free speed up to 22,000 rpm and powerful 1/2 hp motor, the 327 will make quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings.
More info: Ingersoll-Rand IR 327 Tire Buffing Tool
Variable speed (0-850 RPM) for controlled drillingHeavy-duty 1/2 inch industrial quality drill chuckCompact and lightweight (4.8 lbs)Large and conveniently located reversing switch and lock-on buttonSide handle can be attached to either side of the tool for better controlConvenient belt clipDouble insulated
More info: Makita 6303H Heavy-Duty 1/2 inch Variable Speed Reversible Drill, 0-850 RPM, 6.5 Amps
The Makita 6824N is a Variable Speed Reversible Drywall Screwdriver. Makita’s exclusive “Silent Synchronized Pin Clutch” design reduces noise and vibration. Variable speed (0-4500 RPM) for more precise control in wood studs makes it the “Contractor’s Choice.” A retractable tool belt clip allows for operation in tight areas and a lightweight aluminum gear housing provides longer tool life. The added ergonomic rubber grip provides positive control.
More info: Makita 6824N Variable Speed Reversible Drywall Screwdriver, 0-4500 RPM, 6.5 Amps
The Makita 6821 is a Variable Speed Reversible Drywall Screwdriver. The drywall screwdriver has a powerful 5.2 Amp motor and weighs only 2.9 lbs, giving it the highest power-to-weight ratio on the market. The ergonomic design reduces operator fatigue and the driver is the quietest and most vibration-free tool in its class. Setting screw-depths is a snap with adjustable depth locator assembly. The nosepiece is easy to install and remove and the in-line pistol grip design means no more wobbling. The screwdriver also include a large variable speed trigger and a large recessed lock-on button for those long hauls.
More info: Makita 6821 Variable Speed Reversible Drywall Screwdriver, 0-4000 RPM, 5.2 Amps
Ingersoll-Rand IR308 is a 1/4" Heavy Duty Air Die Grinder. A durable yet economical choice offering longer life and higher free speed at 25,000 rpm. A general purpose tool designed for porting, light weld grinding, and breaking sharp edges.
More info: Ingersoll-Rand IR 308 1/4″ Air Die Grinder
The Ingersoll-Rand 231 is a 1/2″ Super-Duty Air Impact Wrench. It offers the sheer power and performance features to tackle the toughest jobs with ease as well as proven durability and economy. The wrench has twin hammer impact mechanism that is built for power and durability. Other features include a pressure-feed lubrication system and variable power control in forward and reverse.
More info: Ingersoll-Rand 231 1/2″ Super-Duty Air Impact Wrench, 8000 RPM
The Makita GD0600 is a 1/4 inch Paddle Switch Die Grinder. It has ergonomically designed slim body for grinding in tight spots. The internal labyrinth construction seals motor and bearings from contamination. The vent slots are designed to direct exhaust air away from the user. The protective Zig-Zag varnish seals the motor from dust and debris for longer life.
More info: Makita GD0600 1/4 inch Paddle Switch Die Grinder, 25000 RPM, 3.5 Amps
The Makita 9557NB is a Factory Reconditioned 4-1/2 inch Angle Grinder. The Makita 9557NB has a protective zigzag varnish which seals the motor from contaminants by forming a barrier under rotation. The labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels. The 7.5 Amp motor design on the Makita 9557NB grinder provides high output power in a more compact tool.
More info: Makita 9557NB Factory Reconditioned 4-1/2 inch Angle Grinder, 11000 RPM, 7.5 Amps
The Makita GV5000 is a 5 inch Disc Sander. It is lightweight for easy operation.
More info: Makita GV5000 5 inch Disc Sander, 4500 RPM, 3.6 Amps
The Makita 3706 Drywall Cut Out Tool has a powerful 5 Amp motor which delivers 32000 RPM for fast cutting in a wide variety of material. It accepts both 1/8 inch and 1/4 inch bits. It has a slim body design for optimum comfort and precise control. Lightweight at only 2.4 lbs for easy handling , 2-way “Slide and Bump” on/off switch. It has a sealed switch for extra protection from dust and debris and a longer tool life. Tool-less depth adjustment sets the desired cutting depth quickly and easily. All ball bearings construction reduces friction and creates smooth rotation. Large and conveniently located shaft lock button for fast bit changes. It has technologically advanced centrifugal for the most efficient cooling of the motor. The fan exhaust vents direct air and debris away from the operator. Durable 10′ cord with cord guard. Convenient storage of wrench on the cord.
More info: Makita 3706 Drywall Cut Out Tool, 32000 RPM, 5.0 Amps
The Makita 9564CV is a 4-1/2 inch angle grinder with super joint system (SJS) design. The powerful 12 Amp motor deliver variable speed of 2800-10500 RPM. It has 5 stage variable speed control dial for matching the RPM to the work.
More info: Makita 9564CV 4-1/2 inch SJS Variable Speed Angle Grinder, 2800-10500 RPM, 12.0 Amps
The Makita HP2040 is a Factory Reconditioned 3/4 inch Variable Speed Reversible Dual Range Hammer Drill. The unit is equipped with a powerful 6.0 Amps motor. The tool runs from 0-2900 RPM at high speed and 0-950 RPM at low speed. It has an In-line positive grip design that maximizes power thrust.
The Makita 9565 is a 5 inch SJS Angle Grinder. The angle grinder is designed with exclusive super joint system (SJS). It features labyrinth construction and advanced motor protection system to withstand the most harsh working conditions. SJS helps prevent gear damage which often occurs if the grinding wheel accidentally catches or binds and the labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels prohibiting contamination. Finally, a protective zig-zag varnish seals the motor from contamination by forming an impenetrable barrier under rotation.
More info: Makita 9565 5 inch SJS Angle Grinder, 10500 RPM, 9.5 Amps
-Pressure-feed lubrication-Reverse bias for 590 ft-lbs maximum torque in reverse-Increased durability, quieter operation-More comfortable contoured handle-In-handle exhaust to direct air away from the operator and the work area
More info: Ingersoll-Rand IR231H 1/2″ Super-Duty Air Impact Wrench, 8000 RPM, 1200 BPM
The Makita 3706K Drywall Cut Out Tool has a powerful 5 Amp motor which delivers 32000 RPM for fast cutting in a wide variety of material. It accepts both 1/8 inch and 1/4 inch bits. It has a slim body design for optimum comfort and precise control. Lightweight at only 2.4 lbs for easy handling , 2-way “Slide and Bump” on/off switch. It has a sealed switch for extra protection from dust and debris and a longer tool life. Tool-less depth adjustment sets the desired cutting depth quickly and easily. All ball bearings construction reduces friction and creates smooth rotation. Large and conveniently located shaft lock button for fast bit changes. It has technologically advanced centrifugal for the most efficient cooling of the motor. The fan exhaust vents direct air and debris away from the operator. Durable 10′ cord with cord guard. Convenient storage of wrench on the cord.
More info: Makita 3706K Drywall Cut Out Tool Kit with Accessories and Case, 32000 RPM, 5 Amps
1 amp, 120 volts, 60 Hz, 130 watts. Variable speed 8,000 - 30,000 RPM 3/32″ tp 1/8″ collet Versatile, high speed, and easy to use It cuts, grinds, sands, drills, sharpens, and polishes Works on metal, wood, ceramic, glass, and plastic Includes tool and 40 accessories in blow molded storage case
More info: Grip 50120 41-Piece Electric Rotary Tool Kit
The Makita 6280DWPLE is a 14.4V 3/8 inch Ni-Cad Cordless Driver-Drill Kit with Flashlight. The drill puts out 319 in-lbs of torque, out-performing most 18V models. It has 16 separate torque settings for precision driving and two speeds of 0-350 or 0-1100 RPM. The compact tool features a comfortable T-handle. It features conveniently located forward/reverse switch for one-hand operation. The compact tool body and lightweight design provides optimum balance and comfort.
More info: Makita 6280DWPLE 14.4V 3/8 inch Ni-Cad Cordless Driver-Drill Kit with Flashlight, 0-350/1200 RPM
Left or right side handle Safety on/off switch 120 volts, 60 Hz. 10,000 RPM. UL listed Includes: Grinder, 4-1/2″ x 5/8″ wire wheel brush, 4-1/2″ x 7/8″ cut off wheel, 4-1/2″ x 7/8″ grinding wheel, 4-1/2″ x 5/8″ backing pad, 40 grit sanding disc, 60 grit sanding disc, 80 grit sanding disc, and (2) 100 grit sanding discs
More info: Grip 50095 4-1/2″ Angle Grinder Kit
|
More:           Search ToolsAdvisor.com: |
Translate Page:
More Power Tools Info:
Power Tools Categories:
    
|
