The Makita BL1830 has a 5x Lower self-discharge keeps battery cells active and ready for use, even after long periods of storage.Makita BL1830 allows for charging at any time will have no effect on the batteryBuilt-in shock absorbing features on the Makita BL1830 protect the batteryThe Makita BL1830 has sixteen (16) firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environmentsThe Makita BL1830 Battery’s built-in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal)
Click here to buy
More info: Makita BL1830 18V LXT Lithium-ion Battery
The Hitachi CR13VBY is a 12-amp reciprocating saw which features a patented new technology called UVP (User Vibration Protection). Hitachi’s UVP technology reduces the overall vibration produced by the motor and therefore drastically lessens the vibration transfer to the user of the tool. A counterweight mechanism reduces full-load triaxial vibration by over 65%. A swing cutting mechanism located near the blade lessens the “rebound” effect that is normally created from a traditional orbital action cut. In addition to less vibration, the CR13VBY produces a faster cut in steel and wood as compared to competitive models.
Click here to buy
More info: Hitachi CR13VBY 1-1/4 Inch Low Vibration Reciprocating Saw with UVP, 11 Amps
Ingersoll-Rand IR429 is a Heavy Duty Air Reciprocating Saw. The IR429 is a versatile air saw for cutting intricate shapes and light radius curves in all types of plastics, fiberglass, and composite materials, as well as aluminum and sheet metal. This reduced vibration tool is excellent for body shop repair, muffler and exhaust work, and sun roof installations.
Click here to buy
More info: Ingersoll-Rand IR 429 Heavy Duty Mini Air Saw
The Makita HP1620F is a 5/8 inch Variable Speed Reversible Hammer Drill with L.E.D. Light. The drill is quite well balanced. The rock hard heavy-duty 5/8 inch hammer drill quickly and efficiently transfers power to the drill bit with the lowest vibration. The unit is packed with the performance, innovation and technology demanded by professionals such as electricians, plumbers, installers and more. Longer lasting brushes, true variable speed control and the built-in L.E.D. technology sets the hammer drill apart from all the other drills.
Click here to buy
More info: Makita HP1620F 5/8 inch Variable Speed Reversible Hammer Drill with L.E.D. Light, 0-2800 RPM, 5.7 Amps
The Makita 6823N is a Variable Speed Reversible Drywall Screwdriver. Makita’s exclusive “Silent Synchronized Pin Clutch” design reduces noise and vibration. The variable speed (0-2500 RPM) provides precise control in metal studs. A retractable tool belt clip allows for operation in tight areas and a lightweight aluminum gear housing provides longer tool life. The added ergonomic rubber grip provides positive control.
Click here to buy
More info: Makita 6823N Variable Speed Reversible Drywall Screwdriver, 0-2500 RPM, 6.5 Amps
The Makita BO5010 is a 5 inch Random Orbit Sander with Dust Collection. The Makita’s random orbital sander that delivers power and control in a light and easy-to-use package that won’t gouge or leave swirls on material. The palm grip fits comfortably in most hands and the on/off switch remains quickly accessible to the thumb. All-ball-bearing construction in the 2 Amp, 12000 OPM motor does a good job reducing vibration for easier control and comfort over extended use. The random-orbit action gives user fast and super smooth sanding while the quick-changing hook-and-loop abrasive discs gets the operator to back it in a hurry.
Click here to buy
More info: Makita BO5010 5 inch Random Orbit Sander with Dust Collection, 12000 OPM, 2.0 Amps
-Dual action pad motion (5/32″ orbit)-A long-life, Low vibration performance-Balanced ball bearing construction
Click here to buy
More info: Ingersoll-Rand 328 8″ Heavy-Duty Dual Action Sander, 825 RPM, 16 CFM
The Little Wonder 6032 is a 10″ Pro Lawn Edger with 3.5 HP Briggs Engine. This is a sleek, light weight commercial edger and trimmer. It has a hard working 3.5 HP Briggs engine with a locked cutter head for edge cuts or horizontal trimming around buildings, trees and fences. The 10″ steel blade is sharpened on all four sides. Shielded 1-9/16″ bearings makes for a more durable and cooler running cutter head. Easy cutting adjustment helps in adjusting cutting depth up to 4″, tension and start/stop of the blade from the operator’s position. The painted handles and anti-vibration grip increases user comfort and eye appeal. Four wheel design provides extra stability and eliminates the need for a curb wheel. All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier maneuverability. Large three quart tank reduces refueling intervals.
Click here to buy
More info: Little Wonder 6032 10″ Pro Lawn Edger, 3.5 HP Briggs Engine
The Little Wonder 6232 is a 10″ Pro Lawn Edger with 4 HP Honda Engine. This is a sleek, light weight commercial edger and trimmer. It has a hard working 4 HP Honda engine with a locked cutter head for edge cuts or horizontal trimming around buildings, trees and fences. The 10″ steel blade is sharpened on all four sides. Shielded 1-9/16″ bearings makes for a more durable and cooler running cutter head. Easy cutting adjustment helps in adjusting cutting depth up to 4″, tension and start/stop of the blade from the operator’s position. The painted handles and anti-vibration grip increases user comfort and eye appeal. Four wheel design provides extra stability and eliminates the need for a curb wheel. All wheels have steel hubs with ball bearings and full axles front and rear for smoother and easier maneuverability. Large three quart tank reduces refueling intervals.
Click here to buy
More info: Little Wonder 6232 10″ Pro Lawn Edger, 4 HP Honda Engine
-The wide stance trunnion eliminates vibration and ensures perfect blade alignment. The 27-by-40-inch T-slot table has a deluxe miter gauge and a beveled front table edge allowing smooth crosscutting capability, while the adjustable positive stops on the
Click here to buy
More info: Jet 708715PK Model: JTAS-10X50-1PK 10″ Right Tilt Cabinet Saw
The Festool PD571594 is a package with the RO 150 FEQ 6″ Dual-Mode Sander and the CT MIDI Mobile Dust Extractor. With the PD571594 package you can do all of your material removal, fine sanding, and polishing quickly and dust-free. You can switch the R0 150 FEQ Dual-Mode Sander back and forth from rough sanding to fine sanding and polishing. The RO 150 FEQ has enough power - 720 watts to be exact - to take on your heavy-duty material removal, but it is also graceful enough to leave a whirl-free finish. The Dual-Mode Sander weighs only 5 lbs. and is designed ergonomically for ultimate comfort. It also has minimal vibration, so it’s effortless to work with. If coarse sanding, fine sanding, and polishing aren’t enough for you, there’s a multitude of pads available for a variety of tasks - all of which can be completed dust-free because of the CT MIDI Mobile Dust Extractor. The CT MIDI is perfect for on-site use. It has full suction capacity but is lightweight and compact enough to move it all over the jobsite. The CT MIDI helps you breathe easier, not just because the air is virtually dust-free, but because it also saves you clean-up time and extends the life of your tools.
Click here to buy
More info: Festool PD571594 RO 150 FEQ 6-Inch Rotex Dual-Mode Sander and CT MIDI Mobile Dust Extractor Package
The Little Wonder 2410-00-01 is a 24″ 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 2410-00-01 24″ 120V Single Sided Electric Hedge Trimmer
The Hitachi C10FCE2 10″ Compound Miter Saw has intense power to tackle even the toughest jobs. It’s also the lightest in its class, so it’s easy to transport to and from the jobsite. The C10FCE2 is comfortable and easy to use because of the horizontal handle with the Elastomer grip. The grip even reduces the vibration felt by the user to reduce fatigue.
Click here to buy
More info: Hitachi C10FCE2 10-Inch 15-Amp Compound Miter Saw
The Little Wonder 1910-00-01 is a 19″ 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 1910-00-01 19″ 120V Single Sided Electric Hedge Trimmer
The Little Wonder 3020-00-01 is a 30″ 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 3020-00-01 30″ 120V Double Sided Electric Hedge Trimmer
The Festool P3571536 is a package with the RO 125 FEQ 5″ Dual-Mode Sander and the CT 33 E Mobile Dust Extractor. With the P3571536 package you can do all of your material removal, fine sanding, and polishing quickly and dust-free. You can switch the R0 125 FEQ Dual-Mode Sander back and forth from rough sanding to fine sanding and polishing. The RO 125 FEQ has enough power - 500 watts to be exact - to take on your heavy-duty material removal, but it is also graceful enough to leave a whirl-free finish. The Dual-Mode Sander weighs only 4.4 lbs. and is designed ergonomically for ultimate comfort. It also has minimal vibration, so it’s effortless to work with in any location or position. If coarse sanding, fine sanding, and polishing aren’t enough for you, there’s a multitude of pads available for a variety of tasks - all of which can be completed dust-free because of the CT 33 E Mobile Dust Extractor. The CT 33 E is Festool’s most powerful dust extractor. It has a large capacity, but is fully equipped to travel around the jobsite. The CT 33 E helps you breathe easier, not just because the air is virtually dust-free, but because it also saves you clean-up time and extends the life of your tools.
Click here to buy
More info: Festool P3571536 RO 125 FEQ 5-Inch Dual-Mode Sander and CT 33 E Mobile Dust Extractor with HEPA Filtration Package
-Tough, 1/2″ collet production-grade router with double bearings for lasting precision. Fast and precise depth setting, electronic speed control. Very low vibration and ergonomic handle design make even long jobs go easy. Fiber base runner prevents surfac
Click here to buy
More info: Festool 574268 Plunge Router
The Little Wonder 1920-00-01 is a 19″ 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 1920-00-01 19″ 120V Double Sided Electric Hedge Trimmer
The Little Wonder 6002 is a 10″ Deluxe Edger-Trimmer with 3.5 HP Briggs Engine. This is a sleek, light weight commercial edger and trimmer. It has a hard working 3.5 HP Briggs engine with adjustable rotating cutter head (rotates up to 120 degrees) for angled edge cuts or horizontal trimming around buildings, trees and fences. The 10″ double-edge blade is reversible. Shielded 1-9/16″ bearings makes for a more durable and cooler running cutter head. Easy cutting adjustment helps in adjusting cutting depth up to 4″, tension and start/stop of the blade from the operator’s position. Comfortable handles with anti-vibration grip increases user comfort. Three wheel design for smoother and easier maneuverability with full axles supporting the wheels for load bearing strength.
Click here to buy
More info: Little Wonder 6002 10″ Deluxe Edger-Trimmer, 3.5 HP Briggs Engine
Hitachi DH40MRY is a 1-9/16″ SDS Max Rotary Hammer with UVP User Vibration protection. A system of dynamic counterweights, and shock handle dampers reduce vibration by over 50%. Hitachi DH40MRY has 9.2 amps, 240-480 RPM, and 1320-2650 blows per minute at full load. DH40MRY Drills up to a 1-9/16″ bit and 4-1/8″ core bit, and the dimension is 18.9 length. The variable lock mechanism allows the bit to be rotated into correct position, great for changing the tip of a demolition bit relative to the tool.
Click here to buy
More info: Hitachi DH40MRY 1-9/16 Inch SDS Max Low Vibration Rotary Hammer with UVP, 9.2 Amps
Please note that this item is on backorder until June-This 16-inch band saw brings the high quality of construction and design found in JET’s 18- and 20-inch resawing band saws into the price range of smaller shops and serious home woodworkers. This saw’s most prominent benefit is the one-piece, dual tapered column design that offers superior rigidity and strength, minimizes vibration, and keeps cuts clean, smooth, and accurate. The saw has a powerful, totally enclosed, fan-cooled, 1-1/2-horsepower motor with a blade speed of 3,000 sfpm.
Click here to buy
More info: Jet 708749 Model: JWBS-16 1 1/2HP Woodworking Bandsaw W/Guide Blocks
Hitachi C12FDH is a 12 Inch dual compound miter saw with laser marker. Exclusive laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or left of the cut mark depending upon the users preference. Powerful 15 Amp motor with 1,950 Watts of output power smoothly powers through hardwoods with ease. Tall, pivoting aluminum fence that stands at a height of 5-1/8″ allows crown molding to be cut vertically for convenience Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Miter angles can be quickly adjusted using Hitachi’s thumb actuated positive stops. Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy
Click here to buy
More info: Hitachi C12FDH 12 Inch Dual Compound Miter Saw with Laser Marker
Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operationIndexing mechanism which allows for fast, efficient, fluting and veining operationsCord wrap for convenient storage of 6 foot power cordPowerful 3/4HP motor will allow you to turn bigger projectsLive center has a removable pin for boring through stockCam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use toolsHollow tailstock allows you to perform long hole boring for lamps and other vesselsConvenient worklight allows better lighting right on the workpiece.Includes 6″ and 10″ toolrest for added versaltility
Click here to buy
More info: Jet 708376 Mini Lathe
The Makita 6826N is a Variable Speed Reversible TEK Screwdriver. The screwdriver is ideal for Self-Drilling/TEKS Screws. It has been specifically designed for heavy driving and high torque applications. The powerful 6.5 Amp screwgun delivers up to 150 in-lbs of torque and the “Sure-Lock” depth adjustment makes for consistent screw depth setting. The exclusive “Silent Synchronized” pin clutch system reduces both vibration and noise and makes the tool one of the quietest screwguns on the market.
Click here to buy
More info: Makita 6826N Variable Speed Reversible TEK Screwdriver, 0-2500 RPM, 6.5 Amps
The Festool 571540 is an ETS 1503 EQ 6″ Random Orbit Sander. It is the right tool for the job. The ETS 1503 has a short 1/8″ stroke for fine finish work. It is balanced for specific stroke, smooth and low-vibration working. It features optimum dust extraction through patented Jetstream principle (air flowing out through an additional hole in the center of the sanding pad). The sanding pad brake prevents scratches when placed on or removed from the workpiece.
Click here to buy
More info: Festool 571540 ETS 1503 EQ 6″ Random Orbit Sander
The Little Wonder 3010-00-01 is a 30″ 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 3010-00-01 30″ 120V Single Sided Electric Hedge Trimmer
The Little Wonder 2420-00-01 is a 24″ 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.
Click here to buy
More info: Little Wonder 2420-00-01 24″ 120V Double Sided Electric Hedge Trimmer
Hitachi C10FSH is a 10 inch sliding compound miter saw with laser marker. Powerful 10-inch sliding dual compound miter saw with adjustable laser marker, electronic speed control, and soft start to reduce noise and recoil. It has 12 amp motor; 3,800 rpm, 10 positive stops for quick settings, pivoting fence to support the work piece. New high flip fence design for extra support Frontal bevel scale makes reading angles easy Soft-start, belt-driven, 12 amp motor reduces vibration for superior results. New laser cut guide delivers highly accurate cuts. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish, and low noise operation.Saw head bevels left and right for fast accurate cutting. Deflection guard disperses chips away from user and helps align cutting lines.
Click here to buy
More info: Hitachi C10FSH 10 Inch Sliding Dual Bevel Compound Miter Saw with Laser Marker
-Patented design produces more air output - moves piles of leaves further and faster-No Blow-Back. You only have to go over the area once! -Ergonomic designed handles, with anti-vibration grip, are height-adjustable for greater comfort and control-Compute
Click here to buy
More info: Little Wonder® LB900-00-O1 9 HP Honda Blower
This is a Jet 708358K JWL-1442VSK 14″ x 42″ Variable Pro Wood Lathe with Legs. This new heavy-duty wood lathe will outperform other lathes in its class. It is constructed of cast iron that adds weight for durability and stability and will help eliminate any possible vibration. The head offers an 8-speed setting from 450 to 3000 rpm that will allow the user to work more comfortably with any size piece of stock.
Click here to buy
More info: Jet 708358K JWL-1442VSK 14″ x 42″ Variable Pro Wood Lathe with Legs
The Jet 708524 JPM-13CS is a 13″ Closed Stand Planer/Molder. It features a sturdy cast-iron table, mounted on four precision-ground steel columns for reduced vibration and smooth feeding. It has fully adjustable rubber-coated infeed and outfeed roller
Click here to buy
More info: Jet 708524 JPM-13CS 13″ Closed Stand Planer/Molder, 1-1/2 HP, 115/230V
